Fanuc IBSS Alarm Codes

Home > Fanuc > Alarm Codes > IBSS Alarm Codes

Fanuc IBSS Alarm Codes

IBSS-001 STOP Slave system error(%d)
Cause: System internal error
Remedy: Notify FANUC
________________________________________________________________
IBSS-002 WARN Slave board not installed
Cause: Slave PCB is not installed
Remedy: Slave PCB is installed .
________________________________________________________________
IBSS-003 STOP Slave PCB abnormal(%d)
Cause: Slave baoard is defective.
Remedy: Please exchange Slave board
________________________________________________________________
IBSS-004 STOP Slave No Data Exchange
Cause: Slave data exchange is stopped.
Remedy: Please check Cable and Master status.
________________________________________________________________
IBSS-005 STOP Slave watch dog error
Cause: Slave detects watch dog error.
Remedy: Please check other device status.
________________________________________________________________
IBSS-006 STOPL Can not find IBS Group
Cause: Can not find the group which is specified by IBS CAHNGE.
Remedy: Please reset the group name by using the sub-menu on TP program.
________________________________________________________________
IBSS-007 STOPL IBS Config change Timeout
Cause: Can not change the INTERBUS-S configuration by IBS CAHNGE.
Remedy: Please confirm to match the INTERBUS-S configuration which is specified IBS CHANGE
and the real configuration.
________________________________________________________________
IBSS-008 STOP Slave Length code error
Cause: The slave length code setting is invalid.
Remedy: Please modify the slave length code setting.
________________________________________________________________
IBSS-009 WARN %s I/O Overmapping no.:%d
Cause: The offset or byte number of slave configuration is invalid.
Remedy: Please modify the offset or byte number of slave configuration setting.
________________________________________________________________
IBSS-010 WARN Please power OFF/ON for Master
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-011 STOP Master system error(%d)
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-012 WARN Master board not installed
Cause: Slave PCB is not installed
Remedy: Slave PCB is installed .
________________________________________________________________
IBSS-013 STOP Master PCB abnormal(%d)
Cause: Slave baoard is defective.
Remedy: Please exchange Slave board
________________________________________________________________
IBSS-014 STOP Master No Data Exchange
Cause: Slave data exchange is stopped.
Remedy: Please check Cable and Master status.
________________________________________________________________
IBSS-015 STOP Module error
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-016 STOP Module reconfiguration
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-017 STOP Defect W1-interface
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-018 STOP Defect W2-interface
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-019 WARN %d: %d.%d %s
Cause: An error has occurred with the specified slave device.
Remedy: Refer to the Cause and Remedy of the cause code (displayed immediately below this error
code on the teach pendant).
________________________________________________________________
IBSS-020 STOP All clear done
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-021 STOP External periphery error
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-022 STOP Defective Datacycle & Rescan
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-023 STOP Transmission Quality Down
Cause: Transmission Quality Down
Remedy: Check the slave device or the cable.
________________________________________________________________
IBSS-030 STOP Device missing in last scan
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-031 STOP Device reports other ID
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-032 STOP Device reports other length
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-033 STOP Further device Interface 1
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-034 STOP Further device Interface 2
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-035 STOP Device missing in last scan
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-036 STOP Device peripheral error
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-037 STOP Device reconfiguration req
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-038 STOP Dev detect checksum error
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-040 STOP Defective Interface1(local)
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-041 STOP DefectiveInterface2(remote)
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-042 STOP No report ID & length code
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-043 STOP Interrupt IBS connection
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
representative.
________________________________________________________________
IBSS-044 STOP Interrupt IBS local before
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-045 STOP Interrupt IBS local behind
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-046 WARN Connect force stopped
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-052 STOP Unknown process data handshake
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-056 STOP No device table found
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-057 STOP IBS controller is defective
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-070 STOP Double address configured
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-071 STOP Device data set len fault
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-072 STOP Process data cfg len fault
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-073 STOP Additional table len fault
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-074 STOP PCP data length fault
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-075 STOP Whole size length fault
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-076 STOP Add table inconsistent
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-077 STOP Max Output offset overstep
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-078 STOP Max Input offset overstep
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-079 STOP Max Offset overstep > 255
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-080 STOP Module count or offset er
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-081 STOP Out Mod No <> out ofs
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-082 STOP In Mod No <> in ofs
Cause: System internal error
Remedy: Notify FANUC
________________________________________________________________
IBSS-083 STOP Real out len <> cfg len
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-084 STOP Real in len <> cfg len
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-085 STOP Overlapped output data
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-086 STOP Overlapped input data
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-087 STOP Out Dev define In module
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-088 STOP In Dev define Out module
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-089 STOP Out Dev define In module
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-090 STOP In Dev define Out module
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-091 STOP Installation depth error
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-092 STOP Length code is unknown
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-093 STOP Remove non exist device
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-094 STOP Device is active
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-095 STOP Config is differ from msg
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-101 STOP Not match Configuration list
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-102 STOP Too many device are connected
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-103 STOP Configuration change (ID-scan)
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-104 STOP Multi data cycle error
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-105 STOP InterBus Timeout process cycle
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-106 STOP Device missing in setup config
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-107 STOP Configuration change (runtime)
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-108 STOP No connection to InterBus-S
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-150 STOP Sequence error
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-170 STOP No warm start command
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-171 STOP Too many modules configured
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-172 STOP More module are connected
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-173 STOP Less module are connected
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-174 STOP Non supported length code
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-175 STOP Wrong length code
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-176 STOP Wrong ident code
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-177 STOP Wrong segment level
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-178 STOP Master Watch dog error
Cause: Slave detects watch dog error.
Remedy: Plase check other device status.
________________________________________________________________
IBSS-203 STOP Init Error %d
Cause: Consult Phoenix Contact for more information.
Remedy: Consult Phoenix Contact for more information.
________________________________________________________________
IBSS-204 WARN Runtime Error %d
Cause: Consult Phoenix Contact for more information.
Remedy: Consult Phoenix Contact for more information.
________________________________________________________________
IBSS-220 STOP HOST watchdog failed, timeout
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-221 STOP HOST not acknowledge process
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-224 STOP Error in IBS Controller comm
Cause: System internal error
Remedy: Document the events that led to the error, and call your FANUC Robotics technical
service representative.
________________________________________________________________
IBSS-260 WARN bit len is set with byte len
Cause: BIT LENGTH is set with BYTE LENGTH
Remedy: Serch slave which has non-zero BIT LENGTH and BYTE LENGTH. in config detail
screen Then set 0 to all of BIT LENGTH or all of BYTE LENGTH
________________________________________________________________
IBSS-300 STOP %s:Bus error
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-301 STOP %s:Max. number was exceeded
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-302 STOP %s:Too many faulty data cycle
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-303 STOP %s:Configuration not activated
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-304 STOP %s:Control_Device_Function
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-305 STOP %s:CRC error in segment
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-306 STOP %s:Error at interface (In)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-307 STOP %s:Bus error occured
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-308 STOP %s:Device is missing
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-309 STOP %s:Multiple errors in segment
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-310 STOP %s:Multiple timeouts in segment
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-311 STOP %s:CRC error (In)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-312 STOP %s:Defective interface (In)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-313 STOP %s:Error at interface (In)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-314 STOP %s:Interrupted interface (In)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-315 STOP %s:Transmission error
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-316 STOP %s:Error in segment
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-317 STOP %s:Wrong length code
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-318 STOP %s:Wrong ID code
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-319 STOP %s:Data register error
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-320 STOP %s:Invalid ID code
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-321 STOP %s:Remote device in local bus
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-322 STOP %s:Device not possible
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-323 STOP %s:Defective interface (Out1)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-324 STOP %s:Defective interface (Out2)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-325 STOP %s:Interrupted interf. (Out1)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-326 STOP %s:Interrupted interf. (Out2)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-327 STOP %s:I/O timeout
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-328 STOP %s:Reset of device
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-329 STOP %s:Device not initialized yet
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-330 STOP %s:Invalid mode at device
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-331 STOP %s:Wrong data length
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-332 STOP %s:Wrong ID code (PCP)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-333 STOP %s:Inadmissible width (PCP)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-334 STOP %s:Dynamic PCP cannot be used
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-335 STOP %s:State conflict (On)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-336 STOP %s:State conflict (Off)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-337 STOP %s:Operation not possible
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-338 STOP %s:Multiple errors (Out1)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-339 STOP %s:Multiple timeout (Out1)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-340 STOP %s:Further device at bus
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-341 STOP %s:Data register error (Out1)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-342 STOP %s:Defective interface (Out1)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-343 STOP %s:Further local bus device
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-344 STOP %s:Invalid ID code (Out1)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-345 STOP %s:Too many devices at local bus
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-346 STOP %s:Multiple errors (Out2)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-347 STOP %s:Multiple timeouts (Out2)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-348 STOP %s:Further device at (Out2)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-349 STOP %s:Data register error (Out2)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-350 STOP %s:Too many devices activated
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-351 STOP %s:Error in local bus
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-352 STOP %s:Too many devices in local bus
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-353 STOP %s:Invalid ID code (Out2)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-354 STOP %s:Error on channel
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-355 STOP %s:Short circuit at output
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-356 STOP %s:Initiator supply error
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-357 STOP %s:Power supply error
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-362 STOP %s:Isolated disconnection error
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-380 STOP %s:Look for Failure
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-381 WARN %s:Peripheral warning
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-382 STOP %s:Control Fault
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-383 STOP %s:User Fault
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-384 STOP %s:User Fault (%s)
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-390 STOP %s:Controller Board Error
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-391 STOP %s:Board has not enough memory
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-392 STOP %s:Board checksum error
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-393 STOP %s:Board system error
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-394 STOP %s:is reported by firmware
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-395 STOP %s: Can’t execute service
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-396 WARN Board status is READY
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-397 WARN Board status is ACTIVE
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-398 WARN Board status is RUN
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-399 WARN Board status is Bus Fail
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-400 STOP %s:Service called w/o Rights
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-401 WARN %s:Firmw.command busy now
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-402 SYSTEM %s:Board error reported
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-403 SYSTEM %s:Firmware error reported
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-404 WARN %s:Bus warning time elapsed
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-405 WARN %s:Wrong Variable ID
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-420 WARN %s:1st Seg. Unswitchable
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-421 STOP %s:Can’t enable multiple Alt.Group
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-422 STOP %s:Dev dependency conflict
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-423 STOP %s:Can’t take Exclusive Rights
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-424 WARN Peripheral warning exists
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-425 WARN Peripheral warning cleared
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-559 WARN %d files saved as ibbdfil.iba
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-560 WARN %d files loaded by ibbdfil.iba
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-561 WARN No file to backup/restore
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-562 WARN File size in archive is wrong
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-563 WARN ibbdfil.iba is truncated %d
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-564 WARN File name must be MS DOS format
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-565 WARN Can’t backup %s
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-566 WARN Can’t restore %s
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-567 WARN Too many files in ibbdfil.iba
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-568 WARN File list is too small
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-569 WARN Can’t get right. Try again.
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-570 STOP Too many PCI board found
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy:
________________________________________________________________
IBSS-571 WARN Failed to backup ibbdfil.iba
Cause: Please see manual IBS SYS FW G4 UM E from Phoenix Contact
Remedy: Please see manual IBS SYS FW G4 UM E from Phoenix Contact