Fanuc ELOG Alarm Codes

Home > Fanuc > Alarm Codes > ELOG Alarm Codes

Fanuc ELOG Alarm Codes

ELOG-009 WARN call a service man
Cause: A system error has occurred.
Remedy: Perform a cold start: 1. Turn off the robot. 2. On the teach pendant, press and hold the
SHIFT and RESET keys. 3. While still pressing the SHIFT and RESET keys, turn on the robot. If
the error is not cleared, document the events that let to the error and call your FANUC Robotics
technical representative.
________________________________________________________________
ELOG-011 WARN Power off, if you want to recover.
Cause: A system error has occurred.
Remedy: Perform a Cold start:
1. Turn off the robot.
2. On the teach pendant, press and hold the SHIFT and RESET keys.
3. While still pressing the SHIFT and RESET keys, turn on the robot. If the error is not cleared,
document the events that let to the error and call your FANUC Robotics technical representative.
________________________________________________________________
ELOG-012 WARN A system error has been occurred.
Cause: A system error has occurred.
Remedy: Perform a cold start:
1. Turn off the robot.
2. On the teach pendant, press and hold the SHIFT and RESET keys.
3. While still pressing the SHIFT and RESET keys, turn on the robot. If the error is not cleared,
document the events that let to the error and call your FANUC Robotics technical representative.