Fanuc RPC Alarm Codes

Home > Fanuc > Alarm Codes > RPC Alarm Codes

Fanuc RPC Alarm Codes

________________________________________________
RPC-002 WARN Can’t decode result
Cause: The client could not decode the results of a remote procedure call.
Remedy: Check the cause code.
________________________________________________________________
RPC-003 WARN Unable to send
Cause: The client could not send the data for a remote procedure call.
Remedy: Check the cause code.
________________________________________________________________
RPC-004 WARN Unable to receive
Cause: The client could not receive a reply from a remote procedure call.
Remedy: Check the cause code.
________________________________________________________________
RPC-005 WARN Call timed out
Cause: The client timed out while waiting for a reply from a remote procedure call.
Remedy: Check the server connection.
________________________________________________________________
RPC-006 WARN Incompatible versions of RPC
Cause: The server received an older version of the RPC protocol.
Remedy: Update the client software to use the same version of the RPC protocol.
________________________________________________________________
RPC-007 WARN Authentication error
Cause: The client or server received an unauthorized remote procedure call.
Remedy: Check the cause code.
________________________________________________________________
RPC-008 WARN Program unavailable
Cause: The server received a remote procedure call for a program which it does not support.
Remedy: Update the server software.
________________________________________________________________
RPC-009 WARN Program/version mismatch
Cause: The server received a remote procedure call which uses the wrong version of a program.
Remedy: Update the client or server software.
________________________________________________________________
RPC-010 WARN Procedure unavailable
Cause: The server received a remote procedure call for a procedure which it does not support.
Remedy: Update the server software.
________________________________________________________________
RPC-011 WARN Server can’t decode arguments
Cause: The server could not decode the arguments of a remote procedure call.
Remedy: Check the client software.
________________________________________________________________
RPC-013 WARN Unknown host
Cause: The client could not determine the server for the remote procedure call.
Remedy: Check the system variables which configure the offline RPC server.
________________________________________________________________
RPC-016 WARN Remote procedure call failed
Cause: The remote procedure call failed.
Remedy: Check the cause code.
________________________________________________________________
RPC-018 WARN Low = %d, High = %d
Cause: The server received a remote procedure call which uses the wrong version of a program.
The versions supported are shown.
Remedy: Update the client or server software.
________________________________________________________________
RPC-019 WARN PC Interface option not loaded
Cause: This operation requires the PC Interface option to be loaded on the controller.
Remedy: Install the PC Interface software option on the controller. Refer to the FANUC Robotics
Software Installation Manual for more information.